Pleatings

A pleating is difficult and requires patience. Unless accurately made, it should never be used on a hat, for upon its accuracy depends its attractiveness. The simplest pleating is a side pleating. This may be made from paper or stiff muslin for practice work. There should not be a thread's difference in the width of each pleat. Any simple pleating requires three times the length of the space it is to cover. If a half-inch pleating is to be made, the folds will come every one and one-half inches. As each fold is laid, baste it down with silk thread. Press slightly on the wrong side before using.

Box pleating—

This is made by turning the first pleat to the left and the next to the right. The same amount of material is required as for side pleating. If the pleats are to be one-half inch deep, the box pleat will be one inch across. Baste with silk thread at the top and bottom, and press on the wrong side. A simple box pleating may be basted through the center and the edges caught together.

Double or triple box-pleating—

This is made by adding one or more pleats, one on top of the other. Begin by making two or more pleats turning to the left, then the same number turning to the right. Be very accurate, being careful to keep the box pleat the exact width desired. Baste at the top and bottom. This pleating is nearly always used by basting through the center, after having slightly pressed. The top and bottom bastings are then removed. The pleating may be caught together at top and bottom of box pleat, and it is then known as rose pleating.