Tailored bow—

This bow is usually made from a piece of ribbon which has both sides alike, although it may be made from any ribbon. A Knox tailored bow is made from gros-grained ribbon. Cut a small piece of buckram for a foundation to sew the ribbon on. This should be sufficiently small so that the ribbon will conceal it. Make two loops of equal length, letting the ribbon lie perfectly flat. Measurements should be very exact. Sew these loops firmly to the buckram; fold the ribbon back and forth to make these loops without cutting. Next fold two more loops, one on each side, one-quarter of an inch shorter and exactly on top. Sew firmly and cut the ribbon off at the center. Fasten two short ends to the back of the bow, allowing them to extend one-quarter of an inch and cut diagonally. Take a short length of ribbon and pleat it once through the center. Wrap this once around the bow and fasten at the back.

This bow is much used on sailors or any tailored hat. There are many kinds of fancy bows brought out from season to season, but if the making of a few styles of standard bows is mastered, others may be easily copied.

SECTION OF MALINE POMPON SHOWING METHOD OF FASTENING ON THE WIRE	RADIATING PLEATING MADE ON LOW PYRAMID OF BUCKRAM
	TRUE LOVERS' KNOT
RADIATING PLEATING MADE ON BUCKRAM FOUNDATION
SECOND METHOD OF MAKING AN ORCHID CENTER